Black Level Test

Evaluate display black performance through pure black uniformity, near-black detail discrimination, and black depth comparison. Test in a dark room for the clearest read on glow, crush, and contrast.

Pure black uniformity Near-black levels Black depth Fullscreen

RGB 0 → 20 continuous dark gradient

← Pure black RGB(0)Dark grey RGB(20) →

Horizontal stripes — RGB(3) on RGB(0)

RGB(3)RGB(5)

Click to Start the Black Level Test

Turn off the lights and watch for glow or crushed blacks.

Pure Black Uniformity Pure black RGB(0,0,0)
Turn off lights, wait 30s · Observe if corners glow
Black Level Detection Pure black RGB(0,0,0)
Pure Black Uniformity Pure black RGB(0,0,0)

Test Mode

Assessment Guide

Visible separationNear-black levels are easier to distinguish in the current viewing conditions
Visible glow or hazeCompare viewing angle, reflections, and fixed versus moving bright areas

Panel Black Level Context

LCDBacklight-based
IPSAngle-sensitive glow
VADark-field variation
OLEDSelf-emitting pixels

Panel behavior varies with settings and viewing conditions

Count Reference

More More near-black steps are visible Compare
Some Check settings and viewing conditions Review
Few Near-black separation is difficult to see Inspect
None Do not treat this as a confirmed defect Recheck

What This Black Level Test Checks

This browser-based tool renders pure black and near-black patterns directly on the page. It helps you inspect visible black uniformity, dark-level separation, glow, and shadow detail. It is a visual check, not a luminance or contrast measurement.

Pure Black Uniformity

Use the all-black mode to look for visible glow, fixed bright areas, or uneven regions across the screen. Compare from your normal position and then from another angle to see which observations change.

Near-Black Levels

The RGB 1-10 blocks show a sequence of tones that are close to black but not identical to it. The goal is to see which steps remain distinguishable under your current brightness, gamma, signal, and viewing conditions.

Embedded Dark Patterns

The black-depth mode places very dark striped patterns over a black field. If the stripes blend into the background, repeat the check after reviewing settings and room reflections rather than treating the result as a confirmed panel defect.

What Does Black Level Mean?

Black level describes how a display looks when it receives black or near-black content. The page can show the appearance of those patterns, but it cannot measure the display's actual luminance in nits.

Black Luminance

Black luminance is an instrument-measured value for the light produced or reflected when a display shows black. This page does not measure it. Room light, reflections, panel design, and display settings can all change how black appears to your eyes.

IPS Glow and Backlight Bleed

A corner haze that changes with viewing angle can be consistent with IPS Glow. A bright area that stays in the same physical position can be consistent with backlight bleed. A browser pattern alone cannot confirm the cause.

Shadow Detail

Shadow detail is the ability to distinguish nearby dark tones in a scene. If several near-black steps disappear into the background, check the source content, brightness, gamma, signal range, and viewing conditions before changing hardware conclusions.

How to Use the Black Level Test

Follow the same viewing conditions when comparing modes or displays.

  1. Prepare the room Reduce strong reflections and use your normal viewing position. A darker room can make small differences easier to notice, but do not confuse room reflections with light coming from the panel.
  2. Inspect pure black Start with Pure Black Uniformity. Look at the center, corners, and edges for visible haze or bright areas. Check head-on first, then change the viewing angle to compare what moves and what stays fixed.
  3. Compare near-black steps Open Near-Black Levels and note how many of the RGB 1-10 blocks you can distinguish. This is a visual observation under the current settings, not a score for the panel.
  4. Check the embedded pattern Use Black Depth to inspect the dark stripes over black. Compare again after checking brightness, gamma, black-level or dynamic-range settings, and the signal path.

What Do You See in the Black Level Test?

Use these observations to choose a follow-up check. They are visual clues, not confirmed hardware diagnoses.

Corner haze that changes with angle

This can be consistent with IPS Glow or another angle-dependent viewing effect. Compare head-on and off-center, and check whether the appearance changes with distance.

Bright area that stays fixed

A fixed bright patch can be consistent with backlight bleed or another uniformity issue. Use the Backlight Bleed Test for a focused comparison.

Near-black blocks blend together

Low-level detail can be affected by brightness, gamma, black-level settings, signal range, browser behavior, or the display itself. Recheck the settings and compare with the Greyscale Test.

OLED patterns look noisy or change

Very dark OLED patterns can look different because of low-level pixel driving and display processing. Compare other grey levels and do not use this observation alone to confirm a fault.

LCD and OLED Black Appearance

Panel technology changes how black and near-black patterns can look, but the page cannot identify your panel type or measure its specifications.

LCD Panels

  • Use a backlight, so black-field appearance can include glow, leakage, reflections, and local-dimming behavior.
  • Viewing angle and panel construction can change how dark corners or edges look.
  • Do not infer exact black luminance from this visual test.

OLED Panels

  • Emit light at the pixel level, so pure-black pixels can look different from an LCD backlight.
  • Very dark grey steps may be affected by pixel driving, processing, and viewing conditions.
  • A static pattern cannot repair permanent OLED burn-in or confirm its cause.

Settings to Check Before Comparing Results

Small changes in the source or display can change what the same pattern looks like.

Brightness and Gamma

Check the display and application brightness or gamma settings before interpreting missing near-black steps as a panel limitation.

Black-Level and Signal Range

Make sure the source and display use compatible black-level or dynamic-range settings. A mismatch can change the visible range of dark tones.

Local Dimming and Picture Mode

Local dimming and picture presets can change black-field appearance and may add or reduce visible halos around bright areas.

Room and Viewing Angle

Reduce reflections, keep the viewing distance consistent, and compare head-on with off-center views when checking for angle-dependent glow.

Frequently Asked Questions

Common questions about black fields, near-black detail, and visible glow.

How can I compare IPS Glow and backlight bleed?

A corner haze that changes with viewing angle is often consistent with IPS Glow. A bright patch that stays in the same physical position can be consistent with backlight bleed. This visual test cannot confirm the hardware cause by itself.

What should I look for on a pure black screen?

Look for visible glow, fixed bright areas, or uneven regions from your normal viewing position. The appearance depends on the panel, room reflections, viewing angle, brightness, local dimming, and signal settings.

Does this page measure black luminance in nits?

No. It renders browser-based black and near-black patterns for visual inspection. It does not measure black luminance, contrast ratio, or native panel specifications in nits.

Why are dark details hard to see?

The cause can be the game or video setting, display brightness or gamma, signal range, viewing conditions, or the display's low-level response. Compare the patterns and check settings before drawing a hardware conclusion.

Why can near-black OLED patterns look noisy?

Very dark OLED patterns can appear different from brighter grey levels because of low-level pixel driving and display processing. Use this page as a visual comparison rather than a measurement or a confirmation of a panel fault.

Can display settings change what I see in this test?

Yes. Brightness, gamma, black-level or dynamic-range settings, local dimming, picture mode, and the GPU signal path can change the visible result. Make sure the display and source settings are intended to match before comparing patterns.

More Screen Testing Tools

Use related patterns to compare dark-level separation, black-field appearance, and color context.

Inspect Black and Near-Black Detail

Open the test in your normal viewing conditions, compare the three modes, and use the related tools when a visual observation needs more context.

Browse More Tools