Gradient Test

Compare greyscale, RGB, and radial gradients to spot visible banding or uneven color transitions. Use the fullscreen view and the controls on the right for a practical visual check of your display and signal settings. This browser-based check shows visible behavior; it does not directly measure your display's native panel specifications.

Greyscale / RGB / radial Dark-range zoom Hue wheel Fullscreen
Shadow range 0–15% — inspect for visible steps
Highlight range 85–100% — compare the bright end
Hue ring gradient 0°→360°
Greyscale radial
Blue radial
Warm radial
Hue wheel

Click to Start the Gradient Test

Compare smooth transitions and look for visible steps or bands.

Gradient Check Greyscale Gradient
Compare the transition for visible steps or bands
Greyscale Gradient Grey 0→255
Greyscale Gradient Full-range tone transition

Test Mode

Color Depth Comparison

6-bit (+FRC) More visible steps
8-bit May show steps
8-bit+FRC Often smoother
10-bit More available steps

Reference only — not a bit-depth measurement

Banding Causes

Limited tone stepsNearby values may separate visibly
Check
Gamma or LUT mappingSettings can compress shadow tones
Possible
Output signalColor format and depth may affect the result
Compare
Source contentCompression can add bands before display
Content

Assessment Guide

Smooth Transition No obvious steps · Compare other modes → Looks clean
Visible Steps Stripes or rings · Check settings and source → Investigate

Online Gradient Test Tool

This browser-based gradient test gives you several controlled patterns for checking whether nearby tones transition cleanly across your display.

Greyscale Gradient Check

Use the black-to-white gradient and the dark-range zoom to look for visible steps where neighbouring neutral tones should blend smoothly.

RGB Channel Check

Inspect red, green, and blue transitions separately. A problem that is easier to see in one channel may point to a different part of the display or signal path.

Radial and Hue Patterns

Radial and hue-wheel patterns change across the image in different directions, making uneven transitions or bands easier to compare with a simple linear gradient.

What Does a Gradient Test Show?

It shows how smoothly your current display setup renders a continuous change from one tone or color to another.

Visible Banding

Banding appears as steps, stripes, or rings in a transition that should look continuous. It can be influenced by available tone levels, gamma, display processing, GPU output, source content, and viewing conditions.

Dark-Range Separation

Near-black areas are often useful for comparison because small changes can be easy to lose in shadows. A dark-range difference does not identify a single cause by itself, so compare it with other patterns and settings.

Signal-Path Clues

If the appearance changes when you alter color depth, gamma, HDR, or the connection mode, the signal path may be contributing. This tool helps you notice the change; it does not measure the hardware directly.

How to Check a Display for Gradient Banding

Use the same viewing conditions while comparing modes and settings.

  1. Start with the greyscale pattern Use the full black-to-white transition first, then inspect the dark-range zoom. Look for abrupt steps, stripes, or patches rather than expecting every display to look identical.
  2. Compare RGB and radial patterns Switch to the color and radial modes to see whether the same issue appears in individual channels or only in one pattern. Keep brightness, gamma, HDR, and refresh settings unchanged during the comparison.
  3. Check the signal settings If your system offers different color-depth or output options, compare them one at a time. A browser pattern can reveal a visible difference, but it cannot confirm the display's native bit depth.

Gradient Test Terminology

These terms help describe what you see without treating a visual pattern as a laboratory measurement.

Color Banding

Visible steps in a transition that should appear smooth. Banding may come from the source, the output signal, display processing, or the panel, so it needs to be isolated with comparisons.

Bit Depth

The number of available code values used to represent each color channel. More available values can reduce quantization steps, but the final result also depends on the rest of the display chain.

FRC and Dithering

Temporal or spatial techniques can make a display appear to produce intermediate shades. They may reduce visible steps, but they are not the same as directly measuring native panel output.

Gamma and LUT Processing

Gamma mapping and look-up tables change how input values are converted to visible output. A change in these settings can make shadow banding more or less noticeable.

Gradient Behavior Across Display Setups

Panel type matters, but the model, processing mode, output signal, and content can matter just as much.

Standard 8-bit Output

What to compare:

  • Look closely at dark neutral and blue transitions.
  • Compare the same pattern after changing gamma.
  • Do not treat visible banding as proof of panel failure.
  • Check whether source content shows the same pattern.

8-bit + FRC

What to compare:

  • Static patterns may look smooth while motion reveals noise.
  • Viewing distance and brightness affect what you notice.
  • Compare with the display's normal content mode.
  • Use the test as a visual reference, not a certification.

Higher-Precision Output

What to compare:

  • More available signal steps may reduce visible quantization.
  • The panel and application still limit the final result.
  • Check whether the same content changes with the setting.
  • Confirm that the selected mode is supported end to end.

OLED and HDR Modes

What to compare:

  • Dark detail and tone mapping can change the appearance.
  • HDR and SDR should be compared as separate conditions.
  • Pixel-level uniformity is a different issue from banding.
  • Judge the mode you actually use for content.

Ways to Reduce Visible Banding

Use controlled comparisons before changing several settings at once.

Keep the Signal Consistent

Use the same resolution, refresh rate, HDR state, and output format while comparing patterns. Otherwise it is difficult to know which change affected the result.

Review Gamma and Picture Modes

Try the monitor's normal gamma or picture preset before applying aggressive software adjustments. A setting that hides banding may also crush shadow detail.

Compare Real Content

After checking the generated pattern, inspect the photos, videos, games, or designs where you noticed the issue. Content compression can create bands that the display did not introduce.

Use Dithering Carefully

Dithering can break up visible steps in some workflows, but it may add texture or flicker. Treat it as a presentation choice, not a replacement for diagnosing the signal path.

This is a browser-based visual check. It can help you compare patterns and settings, but it cannot identify native panel bit depth or replace an instrumented display measurement.

Frequently Asked Questions

Common questions about gradient banding, color depth, and display testing.

What does a gradient test show?

A gradient test helps you see whether a display renders a smooth transition between nearby shades. Visible steps or bands can be related to the display, signal path, settings, source content, or viewing conditions, so the result is a visual check rather than a direct bit-depth measurement.

Why can I see banding in a smooth gradient?

Banding can appear when a transition is represented by limited tone levels or when the display, GPU output, gamma, or content processing compresses nearby shades. Dark ranges often make small differences easier to notice, but the cause depends on the full signal chain.

Does a 10-bit signal remove all gradient banding?

No. A higher-precision signal can provide more available steps, but it does not guarantee a banding-free result. The panel, display processing, GPU settings, application, and source content all affect the final gradient.

Is this gradient test a bit-depth measurement?

No. This browser-based tool generates visual patterns for comparison. It cannot identify a display's native panel bit depth or replace an instrumented color and signal-path measurement.

Why should I test greyscale, RGB, and radial gradients?

Different patterns reveal different problems. Greyscale shows neutral-tone separation, RGB patterns isolate individual channels, and radial patterns can make uneven transitions easier to notice as the rate of change varies across the image.

How can I tell display banding from content banding?

Compare the browser-generated pattern with the original content using the same display settings. If the test pattern is smooth but one image or video shows bands, the source or its compression may be contributing. If both show bands, inspect the display and signal settings as well.

Gradient Testing Tips

  • Control the room: Ambient light and viewing distance can change how easily you see dark-range steps.
  • Use fullscreen: Compare the same pattern at a large size so browser layout does not become the main variable.
  • Change one setting at a time: Keep a simple note of gamma, HDR, color depth, and output changes.
  • Separate patterns from proof: A visible band is a reason to investigate, not by itself a diagnosis of panel bit depth or hardware failure.

More Screen Testing Tools

Use these related checks to compare color, HDR, and panel behavior from other angles.

Check Your Gradients

Run the greyscale, RGB, and radial patterns in fullscreen, then compare the result with your normal display settings and real content.

Browse More Tools