OLED Gray Test

Use this free OLED gray test to examine an OLED display across 21 grayscale levels, from black to white. Check for burn-in, uneven brightness, tint, and visible pixel defects on phones, tablets, monitors, and TVs.

Mobile friendly Monitor test TV compatible Instant results

Click to Enter Fullscreen Test

Step through 21 grayscale levels to reveal burn-in

Watch the mid-tone grays (40-60%) for ghosting
OLED Gray Test 21 levels · 0-100%
50% Gray Level 11 / 21

Test Mode

Gray Level

50% · 50% Gray
Auto-cycle interval2.0s

Display Info 24-bit

Resolution—
Viewport—
Device Pixel Ratio—
HDR Signal—

Assessment Guide

Clean GrayEven tone · No patches or tint → Healthy panel
Burn-In DetectedGhosting or tint on mid-tone gray → Possible wear

What Is an OLED Gray Test and Why Does It Matter?

An OLED gray test cycles through neutral gray backgrounds so you can inspect how evenly the panel produces different brightness levels. These mid-tone shades can make faint burn-in, tinting, and uneven wear easier to spot than a single black or white screen. The test is useful when checking a new display, investigating a visible mark, or monitoring an OLED panel over time.

Each level presents a different signal for the pixels to reproduce, helping you compare brightness and color across the screen. Look for patches, bands, ghosted shapes, or pixels that do not match the surrounding gray. A gray test is not a laboratory measurement, but it is a practical visual check before you decide whether a display needs closer inspection.

Why Use This OLED Gray Test?

  • Free in-browser tool — no download, account, or installation required.
  • 21 grayscale levels from 0% black to 100% white for a broad visual check.
  • Manual controls plus adjustable automatic cycling for a repeatable pass.
  • Usable on phones, tablets, laptops, monitors, and TVs with a modern browser.

How to Perform an OLED Gray Test

A simple four-step process for checking burn-in and panel uniformity.

  1. Start the Test Click the test area to enter fullscreen, then begin at black and move through the grayscale sequence.
  2. Observe Each Level Inspect each level for tint, patches, bands, ghosted shapes, or brightness changes that do not match the rest of the panel.
  3. Check for Burn-In Pay extra attention to mid-tone grays around 40% to 60%, where subtle wear and uniformity differences may be easier to see.
  4. Document Findings Note the gray levels and screen areas where you see a possible issue. Press ESC to exit fullscreen and repeat the check from another viewing angle if needed.

What Can an OLED Gray Test Detect?

Gray backgrounds can reveal display issues that are easy to miss on solid colors.

Screen Burn-In

Faint logos, bars, or ghosted shapes that remain visible as the gray level changes. Mid-tone grays are often useful for spotting uneven pixel wear.

Screen Uniformity Issues

Brightness or color differences across the panel, including patches, bands, and darker or lighter areas.

Dead or Stuck Pixels

Pixels that remain black, bright, or a fixed color instead of matching the surrounding gray.

Color Accuracy Problems

A gray field that looks tinted rather than neutral, which may point to color balance or panel consistency issues.

How to Get More Reliable OLED Gray Test Results

A controlled viewing setup makes subtle differences easier to judge.

Testing Environment

  • Test in a dim room and reduce reflections without making the room completely dark.
  • Clean the screen first so dust or smudges are not mistaken for pixel defects.
  • Let the display reach its normal operating temperature before comparing levels.

Viewing Techniques

  • Check from a normal viewing position, then try a few angles for possible uniformity changes.
  • Move closer only when needed to inspect a suspected pixel; judge the overall panel from a normal distance.
  • Compare adjacent gray levels and repeat any finding to separate a real pattern from a temporary viewing artifact.

OLED Gray Test FAQ

Short answers about burn-in, grayscale levels, and display compatibility.

Why are gray levels useful for checking OLED burn-in?

Gray backgrounds make uneven brightness, tint, and retained shapes easier to notice than many solid-color screens. Burn-in or uneven pixel wear can stand out in the mid-tone range, so moving through multiple gray levels gives you a broader check of the panel.

How many gray levels should I test?

For the most complete check, run all 21 levels from black to white. If you only have a minute, start with the mid-tone range around 40% to 60%, where uniformity issues and signs of burn-in may be easier to see. The 50% level is a useful starting point, but it should not replace the full sequence.

What is the difference between a gray test and a solid-color test?

Solid-color tests are useful for spotting dead pixels, stuck pixels, and obvious color defects. A gray test focuses on brightness transitions, tint, uneven wear, and panel uniformity. Using both types of tests gives you a more complete visual check.

Can I use an OLED gray test on an LCD display?

Yes. Gray backgrounds can reveal backlight uniformity, image persistence, tint, and pixel issues on LCD, LED, QLED, and OLED displays. LCD panels do not develop OLED-style burn-in, but they can still show other display irregularities.

More Display Testing Tools

Pair the gray test with these focused checks for a broader view of your display.

Ready to Check Your OLED Display?

Run the OLED gray test now to review burn-in, uniformity, and visible pixel issues across all 21 levels.

Browse More Tools